
Singapore Carpentry Price Guide 2026 : Cost per foot run
Embarking on a BTO or resale renovation in Singapore can feel like a maze of soaring materials costs and confusing quotes. In 2026, custom carpentry is commonly quoted by per foot run (pfr). But the final price can vary significantly depending on the cabinet material, finish, hardware, dimensions, level of customisation and the works done.

Planning your renovations ? Send us your layout plan or existing pictures and we help you plan and send you estimated quotation base on your requirements.
At Living Solution, our indicative 2026 Custom Carpentry price ranges from S$240 to S$400 per foot run (pfr) for traditional plywood with laminate or S$300 to S$600 pfr for ENF plywood with PUR finish.
For homeowners looking for moisture resistant and wood free formaldehyde free options, our indicative prices ranges from S$180 to S$260 pfr for Aluminium while SUS 304 grade Stainless Steel ranges from S$210 to S$450+ pfr. Depending on the materials, construction method, finish and configuration.
Aluminium Tall Cabinet, Balcony Cabinet or Outdoor Cabinet starts from $520 – $700 pfr for full height or tall cabinets from 180cm to 240cm tall. While Premium Stainless Steel Tall Cabinet, Balcony Cabinet or Outdoor Cabinet starts from $980 – $1310 pfr for full height or tall cabinets from 180cm to 240cm tall.
Aluminium and Stainless Steel Tall Cabinets such as Balcony Cabinet, Outdoor Cabinet, Storage Cabinet and Wardrobes are priced higher. Due to increased material cost associated with its higher height, more hardware used, structural reinforcement, fabrication, finishing requirements as well as higher installation costs. Compared with standard bottom cabinets, tall cabinet requires more materials and fabrication works as well additional efforts during installation.
Pricing Note : The pricing shown in this guide are indicative Living Solution rates for 2026 and are intended for renovation budgeting purposes. Final quotation varies depending on the works done. Additional cost applies for tabletop, countertop, accessories and other specification selected. The total renovation ultimately depends on room dimensions, custom configuration, hardware grades and material choices. A detailed quotation will be provided base on the actual requirements of each project.
The pfr price covers the custom cabinet and basic installation. It does not include works such as dismantle and disposal, electrical and lighting works, plumbing works and complex design or premium material upgrade. The standard PFR price also includes standard quality soft closing quality hinges. Accessories such as pull out baskets and hardware upgrade (eg. Blum) is quoted separately.
What does Per Foot Run (PFR) Mean ?
A foot run (pfr) is one linear foot of cabinetry measured along its length. For example, a cabinet run measuring 10 feet (10ft) in length represents 10pfr.However, homeowners should check whether a quotation is priced for one row of cabinets or includes both top and bottom cabinets especially for kitchen cabinets.
For kitchen renovations, the top and bottom are often kitchen cabinets quoted separately as they are separate cabinet runs. A quotation should clearly state whether the pfr applies to the top cabinets, bottom cabinets or both.
A complete kitchen quotation may also separate breakdown cost of top cabinet, bottom cabinet, countertop, accessories. appliances, plumbing works, electrical & lighting works and dismantle and disposal works.
For example, countertops may include materials such as Stainless Steel, Quartz and Sintered Stone. While accessories include drawers, pull out baskets, dish rack, pull down mechanisms and other internal storage accessories. Appliance such as stainless steel sinks, taps, hob, hoods and ovens may be priced separately.
At Living Solution, you can find different types of stainless steel sinks as well bundle package of hob and hoods from different brands such as Mayer, Aerogaz, Turbo, Techno and Elaine.

Material Breakdown : Stainless Steel Vs Aluminium Vs Wood
Rather than looking at price alone, it is important to understand which materials are being used, their specifications, construction method, hardware used (such as Blum) and installation scope. Two carpentry quotation with similar pfr prices may have very different materials, construction methods or inclusions.
For moisture-prone areas, homeowners should also consider how different materials perform when exposed to humidity and water.
For example, particleboard or MDF is less suitable for areas with frequent moisture exposure particularly if water reaches unprotected edges or joints.
If possible, it may be worth prioritising a larger portion of the carpentry budget in wet areas such as kitchen, bathroom , laundry and balcony where material selection and construction can have a impact on long term use in Singapore’s humid climate.
Stainless Steel Vs Aluminium Vs Wood Carpentry : Which is best ?

Where Stainless Steel and Aluminium May Be Suitable
- Kitchen Cabinet
- Bathroom Vanity Cabinet
- Outdoor and Balcony Cabinet
- Home prone to termites or with past pest issues
All prices below is Living Solution Types of Carpentry and Pricing in 2026 and not fixed Singapore-wide market prices. Below pfr quote only covers the custom cabinet and basic installation. Final pricing depends on project specifications and configurations.
Stainless Steel Carpentry Series
Our SUS 304 Stainless Steel Cabinetry is manufactured in China and can be custom to your layout, needs, preferred colours such as solid colours or wood tones and design. Suitable for BTO, HDB, Condo and Landed including kitchen renovation, wet areas and outdoor areas.
Living Solution Pricing : SUS 304 grade Stainless Steel Carpentry : from S$210 to S$450+ pfr
The price range reflects differences between our Economy Welded series and Premium Honeycomb series including their construction method and internal structure.
– Economy Welded Series : SUS 304 Food Grade Thin Welded cabinet structure with visible internal welding marks

– Premium Series : SUS 304 Food Grade Solid Stainless Steel construction with internal aluminium honeycomb

Primary Use : Kitchen Cabinet, Bathroom Vanity Cabinet , Outdoor and Balcony Cabinet if needed can also use for Pantry Cabinet and Tall Cabinet
Aluminium Carpentry Series
Quality Aluminium Cabinet made in China with choice of colours , design, size and customisable to your layout.
Living Solution Pricing : Aluminium Carpentry from S$180 to S$260 pfr
The 2-ply and 4-ply options use different internal honeycomb construction specifications which contribute to different price points.

– 2 ply Aluminium : Aluminium with internal 2 layer aluminium honeycomb
– 4 ply Alumnium : Aluminium with internal 4 layer aluminium honeycomb
Primary Use : Kitchen Cabinet, Bathroom Vanity Cabinet , Outdoor and Balcony Cabinet if needed can also use for Pantry Cabinet, wardrobes, storage cabinet and display cabinet
Wood Carpentry Series


– Traditional Plywood : Local Carpentry or Malaysia Carpentry
Living Solution Custom Local Carpentry or Malaysia Carpentry Pricing for Traditional plywood with laminate starts from S$240 to S$400 per foot run (pfr)
– ENF Plywood manufactured in China with PUR finish and ABS edge sealing designed for moisture resistant.
Living Solution Custom China Capentry Pricing for ENF plywood with PUR finish starts from S$300 to S$600 pfr.
Primary Use : Dry areas cabinets such as Wardrobes, TV Consoles, Entryway Cabinet, Storage Cabinet, Display Cabinets, Altar Cabinets, Pantry Cabinet, Study Table and Tatami Bedframes
PFR Included: standard materials + standard construction + standard finish + delivery and installation
*Standard materials refers to Stainless Steel, Aluminium or Wood
Additional charges:
– Countertops and Tabletops : quoted separately
– Premium hardware (e.g Blum) : quoted separately
– Accessories & Drawers: quoted separately
– Lighting such as LED : quoted separately
– Special design: quoted separately
– Electrical/plumbing work: quoted separately
– Dismantle & Disposal work: quoted separately
Custom Carpentry in Singapore – Design Options & Local Installation
Custom Carpentry with latest design trends at affordable prices with local installation in Singapore. At Living Solution Singapore, we offer with choice of Local Carpentry , Malaysia Carpentry using plywood or China Carpentry using Stainless Steel, Aluminium or Plywood in ENF, E0 or E1.
One of the advantages of working with Living Solution is the choice of carpentry sources. Depending on your requirements and budget, you can consider local Singapore carpentry, Malaysia carpentry or China carpentry all available with local measurement, design and installation.
Local carpentry or Malaysia carpentry may be suitable and convenient options for homeowners who prefer plywood based carpentry. Also it is generally faster produced than China carpentry.
Select the right choice of carpentry base on your needs, overall renovation budget, preferred budget, type of carpentry required, material selection, available space, project timeline and installation requirements.
Why local installation matters
Even with well designed and precisely manufactured carpentry requires careful installation. Living Solution Singapore provides local installation in Singapore. Allowing the carpentry to be installed according to home accurate measurements and site condition. Local installation also makes it easier to identify and address installation-related issues where necessary.
Itemised Carpentry Budget Estimates
The following examples are illustration budget calculations based on the standard dimensions and Living Solution’s 2026 indicative rates. They are not fixed quotations.
Standard 4 room HDB or BTO Flat
Kitchen Cabinet (10ft bottom and 10ft top)
Our stainless steel and aluminium cabinets are usually calculated by metre. So this example as below will show metre and 10ft for easier transparent pricing guide. 10ft is 3.048m
Stainless Steel Kitchen Cabinet
Economy Welded Series
Bottom Cabinet + Countertop: S$800/m × (10ft) 3.048 m = S$2,438.40
Top Cabinet: S$800/m × (10ft) 3.048 m = S$2,438.40
Combo (Top + Bottom): S$2,438.40 + S$2,438.40 = S$4,876.80
Premium Series
Bottom Cabinet + Countertop: S$2,000/m × (10ft) 3.048 m = S$6,096.00
Top Cabinet: S$1,400/m × (10ft) 3.048 m = S$4,267.20
Combo (Top + Bottom): S$6,096.00 + S$4,267.20 = S$10,363.20
Aluminium Kitchen Cabinet
Premium 2ply Aluminium Kitchen Cabinet
Bottom (without tabletop): S$600/m × (10ft) 3.048 m = S$1,828.80
Top: S$700/m × (10ft) 3.048 m = $2,133.60
Combo (Top + Bottom): S$1,828.80 + S$2,133.60 = S$3,962.40
Premium 4ply Aluminium Kitchen Cabinet
Bottom (without tabletop): S$700/m × (10ft) 3.048 m = S$2,133.60
Top: S$800/m × (10ft) 3.048 m = S$2,438.40
Combo (Top + Bottom): S$2,133.60 + S$2,438.40 = S$4,572.00
Table Tops (10ft)
Sintered Stone: $150/pfr × 10ft = S$1,500.00
Quartz: S$110/pfr × 10ft = S$1,100.00
Premium Stainless Steel: S$600/m × 3.048 m = S$1,828.80
Included: Delivery and installation.
Excluded: Accessories, sink, tap, stove, plumbing works, electrical works, dismantling, and disposal of existing cabinets/fixtures.
Aluminium Tall Cabinet | Outdoor Cabinet | Balcony Cabinet
Eg. S$950 x 2.4m Height x 1m Length = S$2280
Or Eg. S$950 x 2m Height x 1m Length = S$1900
Included: Delivery and installation.
Excluded: Accessories, hardware upgrades, materials upgrade, special design, electrical works, dismantling, and disposal of existing cabinets
Bathroom Stainless Steel Vanity Cabinet and Mirror Cabinet Pricing

ENF Plywood China Carpentry Estimated Price
Master Bedroom
Swing Door Wardrobe (2.1m × 2.4m)
ENF plywood with PUR finish – S$3,024.00
Common Bedroom (Each)
Swing Door Wardrobe (1.8m × 2.4m)
ENF plywood with PUR finish – S$2,592.00
Living Room
TV Console with Storage Cabinet (2.4m × 2.4m)
ENF plywood with PUR finish – S$3,456.00
Note: The above estimate is based on the scope listed above. The final quotation may vary depending on the actual layout, dimensions, material selection, design complexity, lighting, glass doors, internal accessories, premium hardware, and other custom requirements.
Carpentry Plan for each area
Plywood remains a practical option for dry areas and carpentry works such as wardrobes, Altar table, entryway cabinet, TV console, storage cabinets and display cabinets.
Living in Singapore’s tropical, humid weather poses unique challenges for home interiors. Year-round moisture and recurring pest risks—such as termites and silverfish—often cause traditional wood cabinetry to swell, delaminate, or harbour mould over time, particularly under kitchen sinks and bathroom vanities.
For a practical balance between material performance and renovation cost , Singapore homeowners may consider a hybrid approach.
Hybrid Carpentry for different zones – Wet Zones and Dry Zones
Wet Zones ( Kitchen, Bathroom, Balcony, Laundry and Outdoor)
Consider using SUS 304 Stainless Steel or Aluminium cabinet as they are water resistant, moisture resistant and termite resistant.
Suitable for : kitchen cabinet, vanity cabinet, balcony cabinet and outdoor cabinet.

Stainless Steel Kitchen Cabinet
Our Custom Stainless Steel Kitchen Cabinet is priced between S$210 and S$450+ pfr, with top and bottom cabinets quoted separately and prf pricing is before countertop, while tall cabinets are separate pricing.

Aluminium Kitchen Cabinet
Our Custom Aluminium Kitchen Cabinet is from S$180 to S$260 pfr where top and bottom cabinet is calculated separately and pfr is before countertop and tall cabinets is priced separately.

Stainless Steel Vanity Cabinet and Mirror Cabinet – Pricing Guide
The pricing for Stainless Steel Vanity Cabinet starts from S$300 to over S$2000+ base on the length and the type of countertop used ( Ceramic top with Ceramic Basin, Sintered Stone Top with Ceramic Basin or Sintered Stone with Integrated Sintered Stone Basin). The price per foot run for Stainless Steel Vanity Cabinet is from S$210 – S$340 pfr, price includes the cabinet and countertop top only. It excludes cost for accessories such as drawers and faucet, plumbing works and dismantle and disposal.
The pricing for Stainless Steel Mirror Cabinet starts from S$300 to over S$1000+ base on the length. The price per foot run for Stainless Steel Mirror Cabinet is from S$210 pfr, price includes the cabinet only. It excludes cost for accessories such as lightings and hardware upgrade, wall mount installation works and dismantle and disposal.
If you are looking to buy as a bundle, the pricing for both Custom Stainless Steel Vanity Cabinet and Mirror Cabinet starts from S$400 – S$520 pfr. Price includes the cabinet and countertop only. It excludes cost for accessories such as drawers, faucet, lightings and hardware upgrade, plumbing, wall mount installation works and dismantle and disposal.

Customisable Stainless Steel Laundry Cabinet

Stainless Steel Balcony Cabinet or Outdoor Cabinet | Aluminium Balcony Cabinet or Outdoor Cabinet
For the tall cabinets , the PFR calculation is completely different from bottom cabinets prices because the pricing is based on both the cabinet length and height in metre.
-Aluminium Tall Cabinet pricing starts from S$950 x Height (m) x Length (m)
-Premium Stainless Steel Tall Cabinet pricing starts from S$1800 x Height (m) x Length (m)
Dry Zones ( Living Room, Bedroom and Wardrobes)
Plywood with laminate provide traditional warmth aesthetic and efficiency cost. Wooden Carpentry comes with with wide range of design and colours. It is a practical choice to use for wardrobes, living room shelving, display unit and TV console as well as study tables and other storage cabinets in dry areas. For homeowners concerned about formaldehyde emissions, you can opt for our low VOC low formaldehyde ENF plywood for your bedrooms. ENF plywood manufactured in China is a better quality wood and carpentry that comes with PUR finish and ABS edge sealing designed for moisture resistant.

Built in Wardrobes with choice of Swing Door, Sliding Wardrobe or Glass Wardrobes

Sliding Wardrobes for small homes such as BTO and Condo in Singapore or bedrooms with limited space.

Built in Glass Wardrobes

Custom Tatami Bedframes with Built in Cabinet and Study Table

Custom Built in TV Console with Feature Wall , display or storage cabinets
Basic Simple Custom TV Console start from S$1,000+ while built in TV Console with feature wall, display, upper cabinets, display cabinets, or storage cabinets start from S$3500+ to S$8000+.

Ready Made Altar Cabinet or Custom Altar Cabinet using plywood with choice of local Singapore, Malaysia carpentry, ENF China Carpentry. Or Solid Wood Teak with engineered wood. Pricing starts from around $800 to over $2500 depending on size, layout, height, material, finish and custom configuration.

Customisable Entryway Cabinet
How to get a Accurate Quote
Asking vague questions like price for 4 room BTO flat will only get a vague estimation. Every home has different dimensions, layouts and material requirements. To get a precise quote for your BTO, HDB, Flexi flats, resale flats, Condominium or Landed house renovation, ensure you provide contractor with the followings.
– Floor Plans with Accurate Measurements of the walls and areas you plan to do custom carpentry.
– Design inspiration : Best to have references images to align with your style and finishes.
– Functional Needs : What you need this cabinet for ? ( E.g. I want to store clothes at my limited bedroom space or I want a cabinet to store my golf outdoor)
Request a custom carpentry quote or visit Living Solution experience store now.


